Be
sure banner is securely anchored
If used
outdoors, be aware that wind can exert considerable force on the banner.
Spread the
banner tight, but do not stretch too tightly. It
may sag slightly.
Light bungee cords may be used, but do NOT use tarp cords.
Lightweight “zip ties” may also be used to tie down.
For long
banners, guide wires need to be attached above and below the banner. The banner should be attached to the wires at each grommet,
then stretched taut by tying the banner ties.
Store
in a cool, dry place
Do
not fold
the banner. Roll no smaller than a
3 to 5 inch inner diameter.
Always
roll the vinyl banner with the letters to the OUTSIDE.
Handle carefully to avoid damaging the lettering.
Clean
the banner with water and mild detergent
Do NOT use an ammonia-based cleaner